Views: 222 Author: Tomorrow Publish Time: 2025-02-10 Origin: Site
Content Menu
● Weaving a Basket with a Log Slice Base
● Weaving a Hanging Basket with Branches
● Tips and Tricks for Successful Basket Weaving
● FAQ
>> 1. What type of plants are best for hanging baskets?
>> 2. Can I use different materials for weaving?
>> 3. How do I prevent the basket from unraveling?
>> 4. How do I maintain the shape of the basket while weaving?
>> 5. How do I create a hanger for the basket?
Weaving a basket to hang a plant is a creative and rewarding DIY project that adds a touch of handmade charm to your home decor. Whether you're a seasoned crafter or a beginner, this guide will provide you with step-by-step instructions, tips, and inspiration to create your own woven hanging basket.
Before you start, gather the necessary materials and tools. The specific materials may vary depending on the type of basket you want to weave, but here's a general list:
-Natural branches or vines: Pliable branches or vines, up to 3 meters long, trimmed with clean and sharp secateurs[1].
-Basket reed and cane: Materials for the basket weave[3].
-Paper twist ties: For securing branches in U shapes[1].
-Plant wire: To wrap around branches[1].
-Coir fibre twine: Can be used as a hanger[1].
-Heavy-duty twistable soft tie plant wire: An alternative material for the basket structure[1].
-Paper rope: For weaving around nails in a log slice base[1].
-Log slice: To create a base, about 12cm in diameter[1].
-Galvanised nails: 100mm long for a 12cm diameter log slice[1].
-Potting mix: To fill the basket once it's complete[1].
-Plants: Choose your favorite plants to display in your handmade basket[1].
Tools:
-Tape measure[1]
-Black marker pen[1]
-Drill[1]
-Hammer[1]
-Scissors[1]
-Black texta[1]
-Garden gloves[1]
-Wire cutters[1]
-Soft nose pliers[1]
-Secateurs[1]
This project involves creating a woven basket using a log slice as the base.
Step 1: Prepare the Log Slice
1. Wrap a tape measure around the log slice and mark nail locations about 5mm in from the edge[1].
2. Space the marks evenly, about 20mm apart, using a marker pen[1].
3. Drill pilot holes at each marked location to prevent the timber from splitting[1].
Step 2: Hammer in the Nails
1. Carefully hammer a galvanised nail into each predrilled hole[1].
Step 3: Weave the Paper Rope
1. Leave a 30mm tail in the centre of the slice[1].
2. Start at the base and weave paper rope around the nails, going around the outside of one nail and then around the inside of the next[1].
3. Continue around the log slice in this way[1].
4. When you reach the starting point, weave the next row in the opposite way—on the outside or inside—of each nail[1].
Step 4: Continue Weaving
1. Continue weaving the paper rope to the top, pushing down the rope as you go to create a tight weave[1].
2. Stop just under the nail heads[1].
-Tip: Tuck in the tail left at the base[1].
Step 5: Create the Top Edge
1. Take the paper rope over the top row to the outside of the basket[1].
2. Weave it under two rows of rope to the inside[1].
3. Bring it back up, then over and under in the next section between two nails[1].
4. Keep going until you have gone around the entire basket to form a top edge[1].
5. Trim the rope with scissors and tuck the tail into the weave[1].
Step 6: Finish the Details
1. Use a thick black texta to blacken the top of each nail head and let it dry for a few minutes[1].
Step 7: Prepare for Planting
1. Line the basket with plastic or a pot[1].
2. Part-fill with potting mix[1].
3. Position plants, then add more mix, firming it down gently[1].
4. Water in[1].
This project focuses on creating a hanging basket using pliable branches or vines.
Step 1: Prepare the Branches
1. Cut pliable branches or vines up to 3m long using clean and sharp secateurs[1].
2. Trim the cuttings[1].
Step 2: Fashion the Frame
1. Fashion up to 8 branches at least 2m long into U shapes[1].
2. Secure at the base with paper twist ties[1].
Step 3: Secure the Top
1. At the top, wrap plant wire around the branches at least 200mm from the ends[1].
2. Wrap a branch around the join 6-8 times to cover the wire, tucking in the ends[1].
Step 4: Weave the Basket
1. Starting at the base, poke a branch in the centre[1].
2. Weave it over and under the cage branches, alternating the weaving on each row[1].
3. At the top, tuck in the branch end[1].
4. Use a length of coir twine as a hanger[1].
This project guides you through creating a wire basket using soft tie plant wire and coir twine.
Step 1: Cut the Soft Tie
1. Cut the soft tie into six 400mm lengths[1].
2. Lay out two groups of three soft ties horizontally[1].
Step 2: Form the Cross
1. Centre a set of 3 ties vertically on the other set to make a cross[1].
2. Use 3-4 paper twist ties to join the cross at the centre[1].
Step 3: Wrap the Centre
1. Wrap coir twine around the centre of the cross, going around 3 soft ties at a time[1].
Step 4: Start Weaving
1. Start weaving twine over and under the soft ties at the centre, spreading the ties out as you go[1].
Step 5: Shape the Basket
1. Use a bowl or vase to shape your basket, taking the twine over and under each soft tie that makes up the warp[1].
2. Keep weaving in this way until you reach the top of the vessel you are using[1].
Step 6: Secure the Top
1. Remove the vessel and cut the twine with a long tail[1].
2. Bend each soft tie over its neighbour to the outside of the basket[1].
Step 7: Finish the Weaving
1. When you come to the last few ties, weave the twine tail around them to tuck into the basket to secure[1].
2. Finish the last few soft ties[1].
Step 8: Coil the Ties
1. Keep taking each soft tie over and under its neighbour until tightly coiled[1].
Step 9: Final Touches
1. Trim the ends of the soft ties and tuck them into the woven rim using pliers[1].
-Use Masking Tape: Basket weaving can be tricky, and it often feels like you need extra hands to hold everything in place. Masking tape can be a lifesaver. Use it to tape everything together as you work to prevent your project from falling apart[3].
-Maintain Even Spacing: Ensure that the spacing between the weaving elements is consistent throughout the basket. This will give your basket a professional and uniform look[3].
-Tuck in Ends: Properly tuck in the ends of the weaving material to create a neat and secure finish. This will prevent the basket from unraveling and give it a polished appearance[1].
-Choose the Right Plants: Select plants that are suitable for hanging baskets and that complement the style of your woven basket. Consider factors such as sunlight, watering requirements, and growth habits[1].
Weaving a basket to hang a plant is a fulfilling and creative project that allows you to personalize your living space with handmade decor. By following the step-by-step instructions and incorporating your own creative touches, you can create beautiful and functional hanging baskets that showcase your favorite plants. Whether you choose to use natural branches, paper rope, or wire, the possibilities are endless.
Choose plants that are suitable for hanging baskets and that complement the style of your woven basket. Consider factors such as sunlight, watering requirements, and growth habits[1].
Yes, you can experiment with various materials such as natural branches, vines, paper rope, wire, or even fabric strips to create unique woven baskets[1][3].
Ensure that you properly tuck in the ends of the weaving material and secure them with glue or wire. This will prevent the basket from unraveling and give it a polished appearance[1].
Use masking tape to hold the weaving elements in place as you work. This will help maintain the shape of the basket and prevent it from falling apart[3].
You can use coir twine, rope, wire, or even macrame techniques to create a hanger for your woven basket[1][3].
[1] https://www.bhg.com.au/lifestyle/craft/how-to-weave-baskets/
[2] https://blog.csdn.net/u012549626/article/details/127719965
[3] https://fallfordiy.com/blog/2016/07/25/weave-basket-planter/
[4] https://www.corrdata.org.cn/news/industry/2018-11-19/171052.html
[5] https://fallfordiy.com/blog/2014/07/08/diy-woven-hanging-planters/
[6] https://iphysresearch.github.io/blog/post/writting/writting-in-the-sciences/unit3/
[7] https://www.hannavanaelst.com/2020/08/14/how-to-weave-a-hanging-basket/
[8] https://www.cambridgeinternational.org/Images/520575-june-2022-examiner-report.pdf
